Inline-four engine 大家族族谱 C MUphS-KE
NKYyMHv6
4G1 "$9ZkADO
The Mitsubishi Orion or 4G1 engine is series of straight-4 internal combustion engines introduced by Mitsubishi Motors in the 1970s, along with the Astron, Sirius, and Saturn. It was introduced in the Colt and Colt-derived models in 1978. Displacement ranges from 1.2 L to 1.6 L. JOk`emle
PX'%)5:q;i
4G3 p6*D^-
The Mitsubishi Saturn or 4G3 engine is series of straight-4 internal combustion engines introduced by Mitsubishi Motors in 1969, along with the Astron, Orion, and Sirius. Displacement ranges from 1.2 L to 1.8 L. @hv]
[( <
<j' #
mUzd
4G4 B#}RMFIj
The Mitsubishi Neptune or 4G4 engine is a series of iron-block OHV straight-4 engines built by Mitsubishi Motors from 1971 to 1979, alongside the Orion, Saturn, Astron and Sirius. This was to be Mitsubishi's last OHV engine. The inability to clear new emissions rules for 1978 meant that the Neptunes were replaced by the 4G1 Orion. I{ $|Ed1
;L7<m U
4G5 Q1rwT g \
The Mitsubishi Astron or 4G5 engine, is a series of straight-4 internal combustion engines first built by Mitsubishi Motors in 1972. Engine displacement ranged from 1.8 to 2.6 litres, making it one of the largest four-cylinder engines of its time. V2*b f`/V
It employed a hemispherical cylinder head, chain-driven single overhead camshaft (SOHC) and eight valves (two per cylinder). United States passenger car versions had a small secondary intake valve referred to as the "Jet Valve". This valve induced swirl in the intake charge, enabling the use of leaner fuel/air mixtures for lower emissions. It was designed as a cartridge containing the valve spring and seat which simply screwed into a threaded hole in the head, similar to a spark plug but inside the cam cover. The rocker arms for the intake valve were widened on the valve end to accommodate the cartridge, which was equipped with a very soft valve spring in order to avoid wear on the camshaft intake lobe. Modifications to the head were thereby reduced as the Jet Valve negated the necessity for a three-valve-per-cylinder design.[1] +MEWAW[}^
In 1975, the Astron 80 introduced a system dubbed "Silent Shaft": the first use of twin balance shafts in a modern engine. It followed the designs of Frederick Lanchester, whose original patents Mitsubishi had obtained, and proved influential as Fiat/Lancia, Saab and Porsche all licenced this technology. =3@^TW(j
Blu^\:?#z-
4G6 b+{,c@1rd
这个作为三菱最著名的系列就不需要多说了， 红头4G63已经成为了传奇。 q+SDJ?v
jLZ+HYyG9
4G8 Q5baY\"9^
这个系列是3G8的私生子， 唯一的成员是4G82 IA''-
+9
*|MPYxJ<
4G9 pvkru-i]
The Mitsubishi 4G9 engine is a series of straight-4 automobile engines produced by Mitsubishi Motors. All are 16-valve, and use both single- and double- overhead camshaft heads. Some feature MIVEC variable valve timing, and it was the first modern gasoline direct injection engine upon its introduction in August 1996. ,}F{V>dhn
PudwcP {
4A3 5 o'V}
The Mitsubishi 4A3 engine is a range of alloy-headed inline four-cylinder engines from Mitsubishi Motors, introduced in 1993 in the sixth generation of their Mitsubishi Minica kei car. g;D
[XBp
A 1.1 L version was made available in 1999 for bigger cars, and was subsequently fitted to the Mitsubishi Pistachio, a limited production car based on the kei class Minica, equipped with the company's Automatic Stop-Go (ASG) system for cutting the engine when idling. So equipped, the Pistachio was able to record fuel economy figures of 30 km/L. f@]4udc e
Kp!sn ,:
4A9 h}nceH0s3d
The Mitsubishi 4A9 engine is the newest family range of all-alloy inline four-cylinder engines from Mitsubishi Motors, introduced in the 2004 version of their Mitsubishi Colt supermini, and built by DaimlerChrysler-owned MDC Power in Germany (previously a joint venture).[1][2] " u@)
The engine project was begun as a joint effort by Mitsubishi Motors and DaimlerChrysler (DCX), with Mitsubishi handling the development of the engines and MDC Power GmbH, a company previously jointly established by Mitsubishi and DCX, handling production. The 4A9 is Mitsubishi's first four-cylinder engine family to adopt a high-pressure die-cast aluminum block.[1][3] JPltB8j?
All engines developed within this family have aluminum cylinder block and head, four valves per cylinder, double overhead camshaft layouts, and MIVEC continuous variable valve timing (intake only). Ztu _UlGC
{x$jGiag+8
4B1 c'ExZ)RJ
The Mitsubishi 4B1 engine is a range of all-alloy straight-4 engines built at Mitsubishi's Japanese "World Engine" powertrain plant in Shiga on the basis of the Global Engine Manufacturing Alliance (GEMA).[1][2][3] Although the basic designs of the various engines are the same, their exact specifications are individually tailored for each partner (Chrysler, Mitsubishi, and Hyundai). The cylinder block and other basic structural parts of the engine were jointly developed by the GEMA companies, but the intake and exhaust manifolds, the cylinder head’s intake and exhaust ports, and other elements related to engine tuning were independently developed by Mitsubishi.
